How to Clean a Used Fish Tank: Leak Test, Descale and Sanitize

12 min read

The short answer

Check the seams and glass, then leak-test the empty tank before you scrub it. Rinse out debris with no soap and loosen white crust with white vinegar on glass. Bleach is optional and disputed, and it replaces vinegar rather than going on top of it. Refill with dechlorinated water, then cycle the tank.

These steps cover a second-hand tank or one that has stood empty for a long time, and the refill steps are for freshwater tanks.

Glass or acrylic: what sources allow on each

TaskGlass tankAcrylic tank
Scrub padsGlass pads, more abrasive (Dr. Sanders)Acrylic-safe pads only (Dr. Sanders, BRS)
BladesRazor blade, light to medium pressure (wikiHow)Plastic blade, tested first (Continuum)
VinegarUsed by wikiHow, BRS, Dustin’sNot recommended (Titan)
BleachUsed by wikiHow, Spruce, Dustin’sSpruce allows it; Titan does not
OutsideGlass cleaner (BRS)No ammonia or alcohol cleaners (BRS)

Dr. Jessie Sanders is an aquatic vet; BRS (Bulk Reef Supply) is a reef-aquarium retailer and Dustin’s Fish Tanks a plant retailer; wikiHow is a how-to wiki and The Spruce Pets a pet magazine; Continuum is a scraper maker; Titan Aquatic Exhibits builds acrylic aquariums. Titan: “It’s recommended not to use vinegar, bleach, ammonia, or alcohol-based cleaners because they could damage the acrylic or harm the aquatic life.” The Spruce Pets lists “Aquarium (either glass or Plexiglas)” among things bleach can clean. No source here settles that clash, so on acrylic, follow the tank maker if you can name it.

What a used tank can carry

The CDC says “Tank water and items in tanks can be contaminated with germs.” and “Children younger than 5 years old, adults 65 or older, and people with weakened immune systems are more likely to get severe illness from germs fish can carry.” It adds: “If you become sick shortly after purchasing new fish or cleaning your aquarium, make sure to tell your healthcare provider that you have a pet fish.”

For fish, Aquarium Science, a hobbyist reference site, doubts that disinfecting a tank after a disease outbreak works, and prefers time: “So it is best just to cycle the tank and filter for several weeks with NO cleaning at all and let Mother Nature take care of whatever might be in the tank.” Other sources here disinfect with bleach (step 6). If fish later look unwell, test the water and contact an aquatic veterinarian.

Supplies and cleaning tools

  • Gloves. The CDC: “Wear gloves when cleaning or caring for your aquarium, especially if you have cuts or wounds on your hands or if you plan to work with rough rocks or spiny fish.” It also asks people with weakened immune systems to let others do the job where they can, or to wear gloves, and says children under 5 should not clean or handle aquarium items.
  • Buckets, sponges and scrapers never used with soap. Aqueon, an equipment maker: “Don’t use buckets, scrub pads or any other equipment on your aquarium that have been used with soap or other chemicals.”
  • White vinegar, not apple cider vinegar (Dustin’s).
  • A scraper made for your tank’s material (see the table) and a water conditioner (step 9).

Both scrapers below are picks from our fish tank cleaner roundup, and the conditioner from our water conditioner roundup.

Cleaning a used tank, step by step

Strip the tank and unplug everything

Dr. Sanders starts with “Unplug filter and lights.” Take out everything that isn’t fixed in place (wikiHow). The CDC: “Dump tank water and clean aquarium items in a bathtub, laundry sink, or outside instead of a kitchen sink when possible.” and “Clean and disinfect sinks and bathtubs after using them to dump aquarium water or clean aquarium items.”

Inspect the seams, glass and frame

Dustin’s: “Check the seals carefully and feel if any are loose, pulling away from the glass, or cracked. Look for cracks and chips in the panes of the tank. Even a small chip in the right place can blow out with enough water pressure.” And: “Also be sure to check the frames/supports.” Dustin’s would pass on a tank “specifically designed to be a terrarium by its manufacturer”.

Leak-test before you clean (one source, Dustin’s)

Dustin’s sets the tank, supported and not scraping on anything hard, where it “can get drenched without problems”, fills it and leaves it “overnight to two days”. Over a long test, it adds, some loss is evaporation, not a leak. Step 4 covers emptying the full tank; a tank that leaks goes to the resealing section below.

Drain it, then knock out loose debris, with no soap

Sources differ on emptying a full tank. Dustin’s: “Do NOT fill the tank up and then dump it out while it’s full – you’re putting extra stress on the supports and glass that way.” wikiHow lifts a small tank to pour it; for one too large to lift, it says to “gently tilt the tank so that the water slowly falls into the bucket”, and “If the fish tank is very large, you may need to use a siphon hose to drain the water into a bucket or sink.” No source here says which way is easier on the seams. Dustin’s then hoses the tank “out on its side first to knock out most of the debris.” wikiHow: “Never use soap or detergent to clean your fish tank or any of the items that go in it. Both are highly toxic to fish and even a small amount of residue left over after cleaning can be deadly.”

Loosen white crust with vinegar on glass, then rinse it all off

Recipes differ. wikiHow: “Mix equal parts water and white vinegar in a spray bottle. Spray the sides of the empty tank thoroughly with the mixture and wait 10-15 minutes.” It also says “You can leave a vinegar and water solution on for up to 48 hours without causing harm to your fish tank.” BRS sprays an empty tank’s crust with “a vinegar solution” of no strength stated for the tank: “After a few hours the crust can be brushed off.” For pumps and heaters, the same page cites “100% undiluted vinegar” or “one part vinegar to 3 parts RO water”. Then scrape: wikiHow uses a razor blade, “Always point the blade away from you with light to medium pressure to avoid scratching the glass.” Green Aqua, an aquascaping retailer, on steel-bladed scrapers: “The algae scraper should not be used in the aquarium corners, as the silicone bonding could be damaged.” API, a maker, says its glass pad is “For glass aquariums only” and “Do not use on dry surfaces.” On acrylic, Titan recommends against vinegar (table), and Continuum says to “test blade in an inconspicuous area” first. Rinse all the vinegar off and drain the tank before any bleach touches it (step 6).

If you use bleach, use it instead of vinegar and follow one named recipe

Bleach is an alternative to vinegar, not a second coat: rinse all vinegar off and drain the tank first. The CDC: “Never mix household bleach (or any disinfectants) with any other cleaners or disinfectants. This can release vapors that may be very dangerous to breathe in.” The recipes: wikiHow sprays “1 part non-detergent bleach to every 9 parts water in a spray bottle” and says “make sure that you do not leave the cleaning solution on the fish tank for more than 15 minutes.” The Spruce Pets says “Prepare a 10% bleach solution by mixing nine parts water with one part bleach in a clean container” and “For an entire aquarium, fill it with the bleach solution”, with “Don’t soak anything in bleach for longer than fifteen minutes.” Dustin’s: “1 part bleach with 9 parts water (10% solution) and rinsing a lot until I can’t smell bleach has always gotten the job done.” The CDC’s bleach page is written for household surfaces, not aquariums, and its first step uses soap, which the aquarium sources here rule out. On the product it says: “Use regular unscented household bleach. Most household bleach contains 5%–9% sodium hypochlorite. Do not use a bleach product if the percentage is not in this range or is not specified. This includes some types of laundry bleach or splashless bleach, which are not appropriate for disinfection.” and “Follow the directions on the bleach bottle for preparing a diluted bleach solution.” On handling: “Make sure you have good ventilation while using bleach products indoors (for example, open windows and doors to allow fresh air to enter).” “Follow the label directions on the bleach product. Check to see if you need to wear any protective equipment, such as gloves or eye protection.” On acrylic, Titan recommends against bleach (table).

Rinse it out and let it dry

Sources differ. wikiHow: “Fill the tank with clean water and let it soak for 10 to 15 minutes,” then “let it air dry for 24 hours. This allows any remaining bleach or vinegar to break down, leaving it safe for your fish.” The Spruce Pets: “Soak the items again in fresh water for fifteen minutes, rinse thoroughly, and air dry completely.” Dustin’s rinses until it can’t smell bleach (step 6).

Clean the lid, hood and light off the tank, unplugged

BRS: “Disconnect the power before cleaning the fixture.” and “If you’re using fluorescent bulbs, let them cool down before wiping them with a cloth.” Follow your light’s own manual on water. Before a used light or pump goes back on, Aqueon’s light manual: “Do not operate any appliance if it has a damaged cord or plug, or if it is malfunctioning, or if it is dropped or damaged in any manner.” BRS: “If you find burnt or blackened bulb holders, melted connections or other faulty components, replace the fixture. It’s not worth the risk of fire in your home.”

Refill with dechlorinated water, then cycle the tank

Dr. Sanders asks for a dechlorinator “that treats chlorine AND chloramine”: “Chloramine is a more stable form of chlorine mixed with ammonia, so ensure it says it treats both on the label. Measure out enough to treat the volume of water you are adding and allow at least a minute for the dechlor to do its job.” Take the dose from the bottle. Our reading, which none of these sources states: a tank that has been emptied, dried or disinfected holds no established bacteria, so cycle it before fish go in. (Dr. Sanders’s “super clean media will reset your biologic filter to ZERO” is about filter media in a running tank; Aquarium Science’s cycle follows an outbreak.) Our guide to cycling a fish tank covers growing the beneficial bacteria, fishless or with fish. When you finish, the CDC: “Wash your hands after feeding fish or handling their supplies, including their tank and items in their tank.”

If the tank leaks: patching and resealing

Loctite, a sealant maker, gives these steps for its aquarium silicone: drain and clean the tank, cut out the old sealant “with a straight razor or another sharp tool”, clean the joints (“Consider using mineral spirits to completely remove any residue.”), run a bead inside the seam and then outside, “Wait for cure time to be achieved before refilling the tank with water”, and fill slowly. Loctite rates that sealant “for any tank with a capacity of up to 30 gallons”, and says: “If the glass itself is substantially cracked, seek the opinion of a professional.”

ASI, which also makes aquarium sealant, differs for its own product. Its data sheet, hosted at chemical-concepts.com, says “DO NOT USE petroleum based solvents.”, names “100% IPA (isopropyl alcohol)” or acetone for cleaning, and adds “ASI recommends waiting for full cure (7 days) prior to using the aquarium.” Follow the maker of the sealant you buy, then leak-test again (step 3). Dustin’s warns that a repaired tank “might leak in the future”.

Used substrate, filters and decorations

  • Gravel and sand. wikiHow: “Clean any gravel before you put it back in the tank.” The Spruce Pets lists “Gravel and rocks” among things bleach can clean, but says: “Avoid using bleach on silk plants, brightly colored gravel, or decorations, as bleaching will fade them. Avoid wood and other porous items that can absorb and retain bleach.” Our gravel cleaning guide covers the vacuum method.
  • Filters and heaters. wikiHow: “Remember to clean any filter media in your tank as well.” The damaged-appliance rule in step 8 applies to every used pump, filter and heater. Our filter cleaning guide covers sponge, hang-on-back and canister filters.
  • Decorations. wikiHow soaks them in the same solution, then rinses them “under running water”; Spruce’s porous-item line applies.

What not to do

  • No soap on the tank or its tools (step 4).
  • No bleach on a tank that still has vinegar, soap or any other cleaner on it (step 6).
  • No method on acrylic before checking the table.
  • No used appliance with a damaged cord or fixture (step 8).

Where your tank, light, filter or sealant maker prints its own instructions, follow them over these general steps. If fish fall ill in the restarted tank, test the water and contact an aquatic veterinarian; our guide to lowering ammonia covers high readings.

Ready to buy?

Our gravel cleaner roundup compares siphons and powered vacuums for the restarted tank, and our Cleaning & Maintenance section gathers the scrapers, magnets and tools.

Frequently Asked Questions

Q. Can I use Dawn dish soap to clean a used fish tank?

wikiHow says never, and Titan, on acrylic tanks, says soaps “could create an unhealthy environment.” One exception: BRS writes that “For basic cleaning acrylic manufacturers recommend using a dilute solution of dishwashing detergent and water”, for an acrylic skimmer and its cup, not a tank that will hold fish; Aqueon says gear used with soap should not go on an aquarium.

Q. How long after cleaning a used tank can fish go in?

None of the sources here gives a wait for a restarted tank. Our reading (step 9) is to cycle it first, as the cycling guide describes.

Q. How do I get rid of the brown stuff in a used tank?

Our brown stuff explainer covers it once the tank runs; our glass cleaning guide covers stains and lime lines.

Sources (16)

Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Aquarium Tales Team
Aquarium Tales Team

Written and reviewed by the Aquarium Tales Team. See the About page for how we work.