Choosing the Best Light Spectrum for Aquarium Plants: Colors, Kelvin and PAR

8 min read

The short answer

No single color does the job. For greenhouse and indoor crops, University of Missouri Extension says photosynthesis peaks in blue and red within 400-700 nm, and Michigan State’s Erik Runkle finds green still moderately effective. Aqueon and Fluval, aquarium makers, each sell or recommend full-spectrum mixes. A Kelvin rating describes how light looks, not that mix.

A planted-tank light can list a Kelvin rating, a “full spectrum” claim and PAR figures on one box, and each describes something different. The two plant-science sources here cover greenhouse and indoor crops, so each source’s scope is named.

Which Colors Plants Use for Photosynthesis

University of Missouri Extension, in its grow-light guide for greenhouse and indoor growers, writes: “The ability of a plant to yield sugars through photosynthesis peaks in the wavelengths landing in the blue and red colors, those generally measuring between 400 and 700 nanometers (nm).” It names that band: “This spectral range of radiation that is active for photosynthesis is called photosynthetically active radiation (PAR).”

Erik Runkle, a professor and floriculture extension specialist at Michigan State University, splits the range by color in the trade magazine Greenhouse Product News. He writes about greenhouse and indoor crops, not aquarium plants, and adds that “because of the diversity of plants though, there are always exceptions to these generalizations.”

WavebandRangeWhat Runkle reports (crops)
Blue400-500 nmHighly absorbed by chlorophyll; typically smaller leaves, shorter stems
Green500-600 nmGenerally less efficient than blue or red, still moderately effective; reaches lower leaves
Red600-700 nmMost efficient for photosynthesis; plants can be elongated without other colors
Far-red700-800 nmNot considered photosynthetically active, but influences growth

Aqueon, an aquarium-products maker, writes that “Red light specifically encourages stem growth in aquatic plants,” that “The blue spectrum also fuels photosynthesis and specifically encourages leaf growth in aquatic plants,” and that green light “also aids in plant growth.” On leaf size, Aqueon’s aquatic-plant claim and Runkle’s crop finding differ; neither covers the other’s plants.

Kelvin, Spectrum and PAR Are Three Different Things

TermWhat it describesSource
Kelvin (K)How warm or cool the light looks to peopleAqueon; Missouri Extension
SpectrumThe mix of colors (wavelengths) a light gives offAqueon
PARThe 400-700 nm range plants use, not an amountMissouri Extension
PPFDHow much of that light reaches a spotMissouri Extension

Aqueon notes that “Light spectrum is often given a Kelvin rating,” but defines spectrum as “a way of describing the mixture of different colors – or wavelengths – a light produces,” and Kelvin by how a light looks: “Light sources that give off a yellowish or warm effect have a low Kelvin rating, while those that produce a crisp bluish-white or cool light have a high Kelvin rating.” It adds that “Most freshwater aquarium lights are rated between 5,500 and 8,000 Kelvin.”

On Kelvin and lumens for growing crops, Missouri Extension says: “Those units represent light that human eyes perceive, not the light that plants use to grow.” One Kelvin figure can sit on top of a varied mix of LEDs, as the Fluval label below shows.

PAR is not a brightness figure either. Missouri Extension: “The PAR does not refer to the light intensity; PAR only refers to the wavelength, or color, emitted by the light source.” The amount is PPFD, measured in micromoles per square meter per second, which “tends to be higher when the light source is closer to plants.” It adds that “The optimal PPFD varies between plants and may vary for different plant growth stages.”

Fluval, an aquarium-equipment maker, answers a customer question on its Plant Pro product page. It calls PAR a measure of light energy, unlike Missouri’s wavelength-only use, ranks spectrum as the most important lighting factor, ahead of color temperature and intensity, and suggests finding out what PAR value a plant was grown under and matching it in the aquarium.

Reading a Plant Light’s Label: Fluval Plant 4.0

Fluval lists one color temperature, 7500K, for all four sizes of its Plant 4.0 LED. For the 22-watt model, sized for 15-24 inch tanks, Fluval lists 14 LEDs at 3000K, 55 at 6500K, 6 at 15000K, 6 pink, 6 at 460 nm and 12 at 480 nm. By our count, 75 of its 99 LEDs are white, in three color temperatures, with pink and two blues added: the six LED color bands Fluval says give it full spectrum lighting. Going by Aqueon’s and Missouri Extension’s definitions, the 7500K describes how that blend looks; the LED list is the recipe.

Fluval also lists figures it calls PAR at four depths:

Model (tank length)PAR at 3 / 6 inPAR at 12 / 18 in
22W (15-24 in)580 / 270110 / 60
32W (23-35 in)640 / 290120 / 70
46W (35-49 in)700 / 310130 / 80
59W (46.25-61 in)750 / 320140 / 90

Fluval uses PAR here as an amount but names no unit or mounting height; Missouri’s term for an amount reaching a spot is PPFD. By our arithmetic, the 22W figure falls from 580 at 3 inches to 60 at 18, about a tenth, and the 59W adds 30 at 12 inches. These are Fluval’s figures for its own light; our planted light roundup notes which makers publish PAR and which don’t. Aqueon adds a depth point of its own: “Certain wavelengths, especially blue, penetrate deeper into water than others, and this can be critical to live plants.”

Red, Green, White and Blue: What Each Source Says

Red. Runkle writes that “Red light is considered the most efficient waveband for photosynthesis, but as mentioned previously, plants can be elongated in the absence of other light wavelengths.” Aqueon adds: “Red light also makes the red hues in plants and fish appear bolder to the human eye.” 2Hr Aquarist, a planted-tank fertilizer brand that publishes lighting guides, says “stronger red/blue stimulates pigmentation in certain plants.”

Green. Green light is “sometimes stated as not being useful to plants for photosynthesis,” Runkle notes, but “a more correct statement is that, generally, green light is less efficient at stimulating photosynthesis than blue or red light.” He adds that “green light is still moderately effective since other pigments absorb the light and make it useful for photosynthesis.”

White. 2Hr Aquarist finds the common 6500K white short on red: “Plain white 6500K diodes lack an adequate red spectrum, so using LED fixtures with plain white LEDs often results in washed out visual colours and poorer pigmentation in red plants, although plants may still grow.” Warmer white trades the other way: “Warm white LEDs often work better for growing plants, but they give a yellowish appearance to the aquarium due to a lack of sufficient blue spectrum.” That is one fertilizer brand’s view.

Blue. Runkle: “Chlorophyll in plants highly absorbs blue light that is used for photosynthesis.” Missouri Extension, writing about crops, warns that “excessive blue light will stunt plant growth,” giving no threshold.

Full Spectrum, RGB Channels and Algae

Aqueon and Fluval use “full spectrum” for a mix of colors rather than one. Aqueon, recommending its own OptiBright light, tells keepers to “select a full spectrum RGB (red, blue, green) option,” and Fluval’s Plant 4.0 gets its full spectrum from six LED color bands, three of them white. For crop lights, Missouri Extension’s first shopping step is: “Check if the manufacturer provides a light spectrum graph.”

Lights with adjustable color channels, such as the Plant 4.0, leave the mix to the owner. No maker page read gives a channel setting for plants, and owners on r/PlantedTank, a planted-tank forum, don’t agree on one:

  • One owner, after an algae problem, wrote: “I have taken out the blue to 15% and have the other 3 at 100%. However my plants are not doing as great now”
  • Another: “I keep my red all the way up then add blue until it evens out the red tint and then add green till the green plants look best.”
  • A third: “My LPS’s manager told me to just keep the lights on the original settings from the producer.” (LPS: local pet store.)

These are single tanks, not tests. On algae, 2Hr Aquarist calls it “a persistent myth that more blue light means more algae” and says “Higher light levels will trigger algae more quickly in tanks with trigger factors, but spectrum (as far as hobby tanks are concerned) is not a factor.” Aqueon points at nutrients: “The truth is that nuisance algae outbreaks are more often caused by nutrient build-up than lighting issues.”

Our guide to aquarium plant fertilizers covers what each one supplies, and if leaves are browning or plants are failing, our guides to why aquarium plants turn brown and what to check when a plant is dying go through the usual causes.

Ready to buy?

Our planted aquarium light roundup compares eight LED lights for planted tanks by tank length, with each maker’s PAR where published, and our Equipment Explained section covers how other aquarium gear works.

Frequently Asked Questions

Q. What color light is worst for plant growth?

The sources read name no single worst color. Runkle, writing about crops, rates green generally less efficient than blue or red, and far-red (700-800 nm) is not considered photosynthetically active.

Q. Is white light good for aquarium plants?

Plants may still grow under plain 6500K white, says 2Hr Aquarist, though red plants color less. Fluval’s Plant 4.0 is mostly white LEDs with pink and blue added.

Q. What Kelvin is best for a planted tank?

The sources cited here give no single best figure. Aqueon puts most freshwater lights at 5,500-8,000K, and Fluval’s Plant 4.0 is rated 7500K.

Q. Does blue light cause algae in a planted tank?

2Hr Aquarist calls that a myth and points to light level in tanks with other trigger factors; Aqueon says nutrient build-up causes nuisance algae more often than lighting does.

Sources (6)
Aquarium Tales Team
Aquarium Tales Team

Written and reviewed by the Aquarium Tales Team. See the About page for how we work.